SPIKE Tool - Don't Guess...SPIKE it!

SPIKE Tool information, repair and order

SPIKE Tool parts identification


SPIKE Tool parts identification

It is critical to ensure #1, the hammer cap, be secure and tight at all times when SPIKE is in use. A loose hammer cap can lead to spurious firing of the tool. This should be checked before each tool use.

SPIKE TOOL REPAIR AND MAINTENANCE

To ensure 100% safe operating efficiency, the manufacturer recommends maintenance of the SPIKE Tool every 2 years. The internal parts of the SPIKE Tool will wear with continued use over time or have reduced functionality due to operating in harsh field environments.

SPIKE Tool Inc. will maintain your SPIKE Tool for you. Ship your tool to your SPIKE Tool Distributor for a manufacturer inspection and overhaul. An estimate for repair and maintenance will be provided for your approval, before commencing work.

The SPIKE Tool will be restored to peak operating performance. There is a one-year manufacturer maintenance warranty, the same as a newly purchased tool.

SPIKE PARTS DESCRIPTION

  1. Hammer cap
  2. Breech cap
  3. Lanyard pin and lanyard
  4. Breech block
  5. Barrel T handle
  6. Barrel
  7. Tapped mounting hole for 25mm ball stud (limit 20kA) or split bolt connector 1/0 AWG copper (limit 10KA) for bonding to ground
  8. Barrel guide
  9. Barrel safety stop
  10. Cable clamp
  11. Safety striker plate 3/8
  12. 2 Allen screws 5/32
  13. Hammer
  14. Hammer spring
  15. Firing pin assembly
  16. Cartridge holder
  17. Power load
  18. Spike
  19. Allen screw 1/8
  20. Allen screw 5/64



SPIKE Tool | History | Repair | Lab Test | Manual | Contact

SPIKE Tool Inc.
Contact Ron Mock, President
president@spiketool.com
General inquiries: info@spiketool.com